Fitting instructions for TC2 top

[XAXA102]

Hi,
I own a 320 TC2 of 88, not pristine but in good condition.
The ragtop is worn.
I have in mind to fit the new top my self, but don't have any idea on how I can do it.
Can one of you help me?

Cabrio-verdeck.de seems to deliver quality tops. What do you think?

Thanks for your replies.
Xavier

[Baur]

Take the old top very carefull apart: so you can see how it was fitted original. When the rubbers are good, take them off very carefull, so you can use them again.

Then make sure you gleu the metal parts (on both sides and the back) on the right spot. When you dismantled the old top, you could see that it is gleud and screwed on the top: make sure you don't cut it off to small (as my dad did), so you can screw it together as well. Without it also works, but I'm not sure how long it's gonna last.

And be very patiened...then the result will be the best.

Here are some pics of our own "roof-change" this summer:
http://home.hccnet.nl/janssen.gerard/100_1721.JPG
Here you see the metal parts gleud on the top, done by my little brother:
http://home.hccnet.nl/janssen.gerard/100_1724.JPG
Both roofparts renewed!
http://home.hccnet.nl/janssen.gerard/100_1726.JPG

Gr Jeroen